SoundTube RS400iBK 4" Pendant Speaker with BroadBeam Tweeter - 70V Black
4-inch coaxial ported pendant - 20-watt transformer for 25/70.7/100 v or transformer bypass applications
max program power - 40w
70.7v taps:
2.5w - 5w - 10w - 20w
The RS400i has a 4-inch polypropylene woofer and one 1.0 inch convex titanium tweeter with FerroFluid cooling mounted to a proprietary cast-aluminum baffle and heat sink. The two-way, ported speaker with an open-ceiling enclosure design that delivers effective low-end response (76 Hz) and 125° off-axis performance (2 to 10 kHz, independently verified). The speaker uses patented ZeroReflection™enclosure technology for optimal sound reproduction and cabinet rigidity. SoundTube®'s proprietary BroadBeam®waveguide tweeter system delivers consistent high-performance audio coverage across the operating band-width. The RS400i speaker design incorporates a low-profile grille, proprietary motor-board and a six-position selectable tap switch for 25-, 70.7- and 100-volt applications with a transformer bypass position simplifies ordering and inventory tracking with transformer bypass position. Includes UL listed hanging hardware with cables and integrated SpeedClamp™self-locking wire grip for fast, easy and secure installation. Euro-block connector and terminal weather boot are included.
SoundTube RS400iBK 4" Pendant Speaker with BroadBeam Tweeter - 70V Black
SND-RS1201i-BK 12"SuperT- High SPL Pendant Subwoofer w/transformer BLACK
The RS1201i is a 12-inch open-ceiling or surface-mount subwoofer tuned for maximum output and performance across the operating bandwidth. By incorporating a 12-inch treated fiber cone woofer and a treated cloth surround in a tuned and ported enclosure, this speaker delivers maximum low frequency response (32 Hz – 200 Hz, ± 10 dB, independently verified) and high SPL (113 dB). The SuperT™ is a special transformer that handles low subwoofer frequencies with very low losses. Mounting hardware includes high-quality UL listed cables and integrated SpeedClamp™ self-locking wire clamp for fast, easy and secure installation. For easy ordering, stocking and installation, the RS1201i includes a two-position tap switch for 70.7-, 100 volt and 4 ohm applications.
SoundTube RS42-EZ-WH 4" Pendant Speaker w/ hanging bracket. 6-position 70v tap switch - WHITE
The RS42-EZ is a 4-inch, coaxial speaker with BroadBeam Ring™technology for consistently smooth high frequency sound, designed for open-ceiling applications. Hanging hardware includes galvanized steel cables and a built in hanging bracket with a screw on cover plate for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. The enclosure is constructed of injection molded ABS with glass fiber reinforcement for lasting durability in indoor or outdoor applications. The RS42-EZ speaker utilizes a 4 position ceramic terminal block input connector and a 6 position tap switch with transformer bypass position and has a 16 ohm impedance for easy daisy chaining in low voltage systems. The ceramic input terminal accepts up to 10 gauge plenum rated signal wire and includes thermal fuse. The RS42-EZ is suitable for use in voice alarm applications subject to EU regulations EN60849 and BS5839-8. Hanging hardware, weather plug, cover plate, and AC-RSEZ-HH-10 are included.
SoundTube SM500i-II-WX-BK 5.25-inch, coaxial, surface-mount, ported (64-watt transformer for 25/70.7/100-volt or transformer bypass Mounting hardware included BLACK
The whiteSM500i-II 5.25" Surface Mount SpeakerfromSoundTube Entertainmentis a 5.25", two-way speaker with a midsize enclosure design that delivers low-end response (60 Hz) and optimal off-axis performance (2 to 10 kHz). The proprietary BroadBeam technology incorporates a high-frequency waveguide mated to a 1" convex aluminum tweeter with FerroFluid cooling. This helps deliver consistent high-performance audio across the operating bandwidth. The result is an audio system requiring fewer speakers with high intelligibility, offering reduced power needs, shorter installation time, and cost-effectiveness.
The SM500i-II Speaker features a low-profile grille and 6-position tap switch with transformer bypass. In addition the security knob reduces the chances of tampering after installation. Designed for indoor and damp outdoor locations to mid-level SPL surface-mount applications, the SM500i-II speaker comes with the Stealth bracket mounting system, allowing for an increased aiming angle. It also includes a detachable mounting plate designed for pre-mounting in either wall or pole applications. The speaker is suitable for music and paging in retail, amusement, restaurant, airports, hotels, schools and casinos.
BroadBeam waveguide technology delivers a consistent dispersion pattern up to 10 kHz for maximum coverage area per speaker
One 5.25" (133 mm) polypropylene woofer and one 1" (25 mm) convex titanium tweeter with FerroFluid cooling
86.0 dB average sensitivity offers high output capabilities and reduced amplification costs
Includes stainless steel screws and weatherized components for indoor and outdoor applications
Easily accessible 6-position selectable tap switch for 25, 70.7, and 100 V applications with transformer bypass position
Patented ZeroReflection enclosure technology for optimal sound reproduction and cabinet rigidity
Aluminum grille with powder coat finish
Includes the SM500i-II Stealth bracket mounting system
Vertical and horizontal pivoting allow the speaker to be aimed anywhere within the installation space
Low-profile enclosure design keeps the speaker close to the wall