Seco-Larm

• Snap-in style fits all standard telecommunications
  wall plates
• 3A Max. output for faster charging
• Uses the latest USB identification circuit; compatible with most devices
• Useful for equipment racks, conference rooms, AV systems, planes, yachts, RVs, buses, gyms, etc.
• Built-in blue power indicator LED
• Connect multiple units together to charge multiple devices simultaneously
• Synchronous rectification, high efficiency
• Power input with reverse polarity protection diode
• Provides complete fault protection such as under-voltage lockout, output short-circuit protection, overcurrent protection, and thermal shutdown

The SECO-LARM-SD-9263-KSQ is a no touch request-to-exit single-gang plate that uses IR technology to request egress from a protected area or activate a device with a simple wave of a hand.

Since no contact is required, the SD-9263-KSQ is ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

Technical Specifications:

Operating Voltage: 12~24 VDC
Current Draw: Standby 16mA@12VDC / 25mA@24VDC; Triggered 20mA@12VDC / 32mA@24VDC
Relay Type: Form C dry contact, 1A@30VDC
Response Time: 10mS
LEDs: Red, Green (reversible)
Output Time: 0.5~20s, toggle
Range: 2"~7" (5~18cm)
Dimensions: 4-1/2" x 2-3/4" x 1-1/2" (115 cm x 70 cm x 39 cm)
Weight: 108 g
Features:

Weather-resistant (IP65) for outdoor use.
Clean and simple no-touch operation reduces the risk of cross-contamination.
Adjustable sensor range up to 4" (10cm)
1A relay, adjustable trigger duration 0.5~20 seconds
Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated
Form C
Single-gang No-Touch sensor
Adjustable sensing range and delay time

• Compatible with:

• Non-handed
• SC4, 6-pin lock
• Entry type
• Key locks and unlocks
• Two keys included

• Pushbar is UL Listed for U.S. and Canada
• Heavy-duty ANSI Grade 1 steel construction
• Allows exit from inside while locked from outside
• Reversible non-handed design
• For metal or wood doors up to 1³/₄" (44mm) thick
• Separate deadlocking latch prevents the use of credit cards or similar means to open the latch bolt
• Allen-type 1/4-turn dogging lock allows the exit device to be unlocked for extended periods of time
• Includes all needed hardware for typical installations
• Works with standard external door handle/lock devices such as the SD-962HL-4A (not included)
• Fits doors from 33" (84cm) to 48" (122cm) wide

• AC Power failure supervision relay
• Battery failure / low battery supervision relay
• Auxiliary output relay
• Relays rated 3A@24VDC
• Adjustable voltage range to compensate for voltage drop
• Built-in backup battery charger (battery not included)
• Selectable 2.2k Ω End-of-Line (EOL) resistor for AC failure and
  battery failure supervision relays via DIP switch
• Selectable delay timer (5 seconds, 5 minutes, 5 hours) for AC
  failure supervision relay via DIP switch
• LED Status indicator for AC input, DC output and channel outputs

• Operating Input voltage: 110~240 VAC
• Field-selectable 12 or 24 VDC output
• Total continuous output current: 3A@12VDC, 1.5A@24VDC
• AC Input fuse rated at 3.15A

• AC Power failure supervision relay
• Battery failure / low battery supervision relay
• Auxiliary output relay
• Relays rated 3A@24VDC
• Adjustable voltage range to compensate for voltage drop
• Built-in backup battery charger (battery not included)
• Selectable 2.2k Ω End-of-Line (EOL) resistor for AC failure and
  battery failure supervision relays via DIP switch
• Selectable delay timer (5 seconds, 5 minutes, 5 hours) for AC
  failure supervision relay via DIP switch
• LED Status indicator for AC input, DC output and channel outputs

• Operating Input voltage: 110~240 VAC
• Field-selectable 12 or 24 VDC output
• Total continuous output current: 3A@12VDC, 1.5A@24VDC
• AC Input fuse rated at 3.15A

• AC power failure supervision relay
• Battery failure / low battery supervision relay
• DC Power failure supervision relay (EAP-5D5Q only)
• Auxiliary output relay
• Relays rated 3A@24VDC, 3A@120VAC
• Adjustable voltage range to compensate for voltage drop
• Built-in backup battery charger (battery not included)
• Selectable 2.2k 9 End-of-Line (EOL) resistor for AC failure and battery failure supervision relays via DIP switch
• Selectable delay timer (5 seconds, 5 minutes, 5 hours) for AC failure supervision relay via DIP switch
• LED Status indicator for AC input, DC output and channel outputs

• AC Power failure supervision relay
• Battery failure / low battery supervision relay
• Auxiliary output relay
• Relays rated 3A@24VDC, 3A@120VAC
• Adjustable voltage range to compensate for voltage drop
• Built-in backup battery charger (battery not included)
• Selectable 2.2k 9 End-of-Line (EOL) resistor for AC failure and
  battery failure supervision relays via DIP switch
• Selectable delay timer (5 seconds, 5 minutes, 5 hours) for AC
  failure supervision relay via DIP switch
• LED Status indicator for AC input, DC output and channel outputs

• Field selectable for 12VDC or 24VDC output
• Operating Input voltage: 110~240 VAC
• Field-selectable 12 or 24 VDC output
• Total continuous output current: 5A@12VDC, 2.5A@24VDC
• AC Input fuse rated at 3.15A

• AC Power failure supervision relay
• Battery failure / low battery supervision relay
• Auxiliary output relay
• Relays rated 3A@24VDC, 3A@120VAC
• Adjustable voltage range to compensate for voltage drop
• Built-in backup battery charger (battery not included)
• Selectable 2.2k 9 End-of-Line (EOL) resistor for AC failure and
  battery failure supervision relays via DIP switch
• Selectable delay timer (5 seconds, 5 minutes, 5 hours) for AC
  failure supervision relay via DIP switch
• LED Status indicator for AC input, DC output and channel outputs

• Field selectable for 12VDC or 24VDC output
• Operating Input voltage: 110~240 VAC
• Field-selectable 12 or 24 VDC output
• Total continuous output current: 5A@12VDC, 2.5A@24VDC
• AC Input fuse rated at 3.15A

http://www.seco-larm.com/Access/request-to-exit/no-touch-request-to-exit/SD-927PKC-NEQ

The ENFORCER No-Touch Request-To-Exit Sensor uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since it is No-Touch, this sensor is ideal for use in hospitals, clinics, labs, clean rooms (to reduce the risk of contamination), schools, factories, or offices.
 

• 3A relay, adjustable from 0.5~30 sec, toggle, or as long as hand is near the sensor
• Dual voltage, 12~24 VAC/VDC
• Range adjustable from 2-3/8"-8" (6~20 cm)
• Stainless steel single-gang plate
• Quick connect screw-less terminal block
• LED illuminated sensor area for easy identification
• Selectable LED colors (turns from red togreen or green to red) when activated

http://www.seco-larm.com/Access/request-to-exit/no-touch-request-to-exit/SD-927PWCQ

The ENFORCER "No Touch" Request-To-Exit Sensor Plates use IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since it requires no touch, this wall plate sensor is ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
 

• No Touch -- just wave a hand in front of sensor
• Sensing range for SD-927PWCQ is up to  2" (5 cm). All others up to 4" (10cm)
• Reliable IR technology senses motion
• No touch reduces the risk of cross-contamination
• White plastic single gang plate
• 3A relay, triggers min. 0.5 sec. or as long as hand is near the sensor
• LED illuminated sensor area for easy identification
• LED changes color to show the relay is triggered
• Quick-connect screwless terminal block

http://www.seco-larm.com/Access/request-to-exit/no-touch-request-to-exit/SD-9963-KSGQ

Post-Mount No Touch Sensor with Access Box is a full-featured exit plate that uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand.

• Adjustable sensor range up to 7" (18cm)
• Weather resistant for outdoor use
• Stainless-steel face-plate
• Hinged plate easily removes from box for easy wiring
• Adjustable trigger duration 0.8~30 seconds or toggle (ON/OFF)
• Form C relay, rated 1A@30VDC
• 12~24VDC
• Gooseneck- or wall-mountable
• Manual override button
• LED-illuminated sensor area for easy identification
• Selectable LED colors (turns from red to green or green to red) on sensor activation
• Includes heavy-duty steel box

• Weather-resistant (IP65) for outdoor use
• Clean and simple no-touch operation reduces the risk of cross-contamination
• Adjustable sensor range up to 7" (18cm)
• Stainless-steel plate, available in slimline or single-gang
• 1A relay, adjustable trigger duration 0.5~20 seconds
• Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated

• Heavy-duty closer for commercial use
• Cast aluminum body & steel arm
• Adjustable sweep & latch speed
• Adjustable back check
• Adjustable spring force (1~6)
• Non-handed installation
• Tested to ANSI 156.4 (2 million life cycles)
• Silver finish
• Door width: 32”~60” (800~1500mm)
• Door weight: 45~330-lb (20~150kg)
• Decorative plastic cover
• Includes parallel arm bracket
• 5 Year warranty

• Weather-resistant (IP65) for outdoor use
• Clean and simple no-touch operation reduces the risk of cross-contamination
• Adjustable sensor range up to 7" (18cm)
• Stainless-steel plate, available in slimline or single-gang
• 1A relay, adjustable trigger duration 0.5~20 seconds
• Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated