The Keypad Load Dimmer is capable of being a member of up to 16 links or scenes. Scenes allow you to control a single light or multiple lights with one button. Program each button to trigger a different scene, control specific lights or your whole house. Lights will ramp to a desired brightness level at a rate from .8 seconds to 1 hour. Certain lights can dim slowly while others turn off instantly, all controlled with a press of a button.
The dimmer portion is pre-programmed with 7 preset scenes
with a light level to create inviting moods right out of the box. The Dimmer controls incandescent lights, low-voltage halogen, magnetic or dimmable electronic transformers. There is also the capability to set the KPLD to a non-dimming mode in order to control such loads as fluorescent lights.
Programming the pushbuttons will allow different UPB commands for each of four events: single-tap, double-tap, hold and release. The operation of the LEDs can also be configured to extinguish other LEDs when it is illuminated to minimize confusion about which scene is activated. Furthermore each LED can illuminate when an On-type command is transmitted or received and it can extinguish when an Off-type command is transmitted or received or vice versa. The 6-Button version has six backlit horizontal pushbuttons as well as a vertical rocker
pushbutton. The 8-button has eight horizontal pushbuttons. Each horizontal button can be custom engraved (minimal charge) for ease of use and to add beauty and functionality to any room.
The KPLD is a wire-in wall mounted device. Installation is simple – just mount in a wall box and connect to line and neutral.