The WS1R was designed to switch instant-on/off of lighting loads. It has a built-in relay (10A or 20A rating) to control different sources on the market today. Limited not only to lighting, but also motors, pumps, or ceiling fans that may hum when using a dimming switch.
.
This profile provides instant-on/off ability to handle heavier loads up to 20A rating.
Available in seven colors: white, light almond, almond, ivory, brown, gray, and black to match practically any décor.
MODEL |
|
WS1R-10 | Wall Switch Relay - 10A |
WS1R-20 | Wall Switch Relay - 20A |
ELECTRICAL |
|
Power Requirements |
Primary: 120 Volts AC, 50/60Hz |
Neurtral Wire |
Required |
Load Type |
Motor, Inductive, Incandescent, LED, |
Transmission Channels |
2 Links/Scenes |
Connections/Power Wire |
16/20 AWG gauge 105 C insulation, Black – Hot/Line (14 AWG for 20A) White – Neutral Red – Load(14 AWG for 20A) Yellow - traveller (controlled by RWS) |
Standby Power Consumption |
<.8 Watts |
Environmental Conditions |
Indoor Use Only Temperature: -40° to 140°F (-40° to 60°C) Humidity: 10% to 90% RH (non-condensing) |
Certifications |
Safety tested for USA and Canada to ETL tested to UL508 UL-508-2010 CSA C22.2 #14-2010 |
OPERATION |
|
Status LED Modes |
All programmable with UPStart Blue, Red, Magenta or Off |
During Power outage |
Retains all settings in Non-volatile EERPOM |
Set-Up Mode |
Tap Top or Bottom Rocker 5 Times - LED will Blink |
MECHANICAL |
|
Button Type |
2 Momentary contact type buttons |
Wire Nuts |
4 included |
Mounting |
Single Gang or multiple-ganged junction box |
Dimensions |
Height: 4.25 in Width: 1.70 in Depth: 1.37 in |
Weight |
5.0 oz. |
Warranty |
5 years |
US Patent No. |
6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending. |