LEA CONNECT352 2 Channel x 350 watt @ 4Ω, 8Ω, 70V and 100V per channel. Internal DSP w/ Crossovers, IoT Device with built in WiFi Hotspot, Wifi or FAST Ethernet connectivity and Highly Efficient Power Supply with Class D Output Stage
  • SKU: LEA-CONNECT352
  • Manufacturer: LEA
  • UPC: 850011348406
  • MFG#: CONNECT352
  • MSRP: $1,746.00
  • Availability: Ready for Pickup
  • LEA CONNECT352 2 Channel x 350 watt @ 4Ω, 8Ω, 70V and 100V per channel. Internal DSP w/ Crossovers, IoT Device with built in WiFi Hotspot, Wifi or FAST Ethernet connectivity and Highly Efficient Power Supply with Class D Output Stage



    Specifications

    CONNECT 352 - Details

    • Features:

      • Web Browser-based UI - works on any device with no software to download
      • Direct LoZ and HiZ (70V or 100V) selectable per channel
      • Proprietary Smart Power Bridge allows user to bridge a channel to achieve double the power of that channel without sacrificing an amplifier channel
      • 3 Ways to Connect 1.) Built in WiFi Access Point 2.) Connects to existing WiFi network 3.) Local Area Network Ethernet connection
      • 96kHz Analog Devices DSP with Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ filters, user configurable speaker limiters, and real time load monitoring
      • Universal Switch Mode Power Supply with PFC. Operation from 100VAC - 240VAC +/-15%
      • Analog fully routable inputs
      • External I/O Port for Remote On/Off and fault monitoring
      • Highly Efficient Class D Output Stage for low AC Current draw
       
    • Specifications:

      • Output Power(20Hz to 20kHz):
      • Connect 352: 2 x 350 WRMS @ 4Ω, 8Ω, 70V, 100V (175W at 2Ω)

        Audio Specs
      • Inputs: Balanced analog Inputs with user selectable 26 dB and 34 dB input sensitivity
      • THD+N: 0.1% (20Hz to 20kHz)
      • Frequency Response: +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
      • Signal to Noise Level: 105dB (20Hz to 20kHz referenced to 8Ω)
      • Crosstalk: 70dB (20Hz to 20kHz)
      • I/O Latency: 1 ms DSP latency under any condition
      • Load Impedance: LowZ down to 2 ohms, 70V direct, and 100V Direct per channel
      • Amplifier Output Classification: Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
      • DC Offset: +/- 3mV

        DSP
      • DSP Architecture: Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
      • Input Matrix: Routable matrix; any input to any output with primary and secondary input priority
      • Crossovers: Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
      • Parametric EQ: 8 Band Parametric EQ per channel
      • Output Delay: 100ms per channel
      • Output Protection: DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
      • User Adjustable Limiting: Peak Voltage and RMS Voltage
      • Load Monitoring: Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources

        Control, Monitoring and Network
      • Network Connectivity: WiFi or 100MB Ethernet with PoE or Built in WiFi Access Point (IEEE 802.11 b/g/n WPA, WAP2, WEP)
      • User Interface: Web Browser User Interface or 3rd Party API control (Q-Sys coming soon)
      • Supported Operating Systems: MAC, iOS, PC, Android
      • Event Reporting: User Downloadable and Viewable Event and Fault log - POE allows for enhanced error monitoring
      • External I/O: External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health
      • Cloud IoT: Cloud based IoT functionality coming Dec 2019


    Exclusive Offers News, specials and more Click here
    Get in touch
    Request Code
    ----------