24-Port PoE Switch with 2x Gigabit Combo Port
 
Item
VIS-LRPOE24-2
Ports
24×10/100Base-TX autosensing Ethernet ports (all support PoE) 
2×Gigabit combo port (RJ45 and SFP)
Port attribute
10/100/1000Mbit/s transfer rate 
Half-duplex, full-duplex and auto-negotiation
Auto MDI/MDIX
Standards
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T 
IEEE 802.3z 1000BASE-X 
ANSI/IEEE 802.3 NWay
IEEE 802.3x flow control
IEEE 802.3af PoE
IEEE 802.3at PoE
MAC
4K
Packet forwarding rate
6.55Mpps
Switching capacity
8.8Gbps
Jumbo Frames
Support
EXTEND mode
Disabled: all ports can communicate with each other, and monitoring optimization is disabled.
Enabled: Downlink ports can only communicate with uplink ports, monitoring optimization is enabled, and transmission distance can be extended to up to 820 Feet.
Status LEDs
Link/Act (steady green): link is normal
Link/Act (flashing green): data is being forwarded
Link/Act (off): no link 
 
PoE (steady orange): the port is powering a powered device properly PoE (off): the port is not connected to any powered device or is not supplying power
 
Power (steady green): AC input is normal Power (off): AC input is abnormal
PoE
802.3at/af Max PoE capacity: 400 W
Consumption
≤ 450 W
AC voltage
100-240 V
Operating temperature
32°F-104°F (0°C-40°C)
Operating humidity
10%-85%
Storage temperature
14°F-158°F (-10°C-70°C)
Storage humidity
10%-90%
Dimensions (W×D×H)
17.3 x 11 x 1.7” (440 x 280 x 44mm)
VIS-LRPOE24-2: 24-Port PoE Switch with 2x Gigabit Combo Port
Spec Sheet