3 pole male cable connector with Nickel housing and silver contacts.
The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.
Features & Benefits
Rugged zinc diecast shell, long lasting and durable
Chuck type strain relief system for secure clamping of cables
Boot with rubber gland gives high protection against bending stresses
Coloured rings and boots available for coding and marking
The new, patented EZ-RJ12/11 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order prior to termination. Use the EZ-RJPRO HD™ Crimp Tool (P/N 100054) for single cycle crimping and trimming of the excess wire. FCC compliant and UL rated. Made in the USA. Patented.
For use in telephone & security installations.
Faster, easier terminations with reduced scrap.
For specialized telephone installations & communications equipment.
For applications requiring custom/specific wire configurations.
The patented EZ-RJ45® Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves performance! Reduces scrap, no wasted crimps. More reliable, higher performance. Crimp with the patented EZ-RJ45 Crimp Tool...crimps and trims in one cycle. Manufactured in the USA. Patented.
Thru holes allow wire pairs to be inserted thru front of connector for faster terminations.
Works with solid or stranded wire.
Simple one piece design...no bars or liners.
FCC compliant, UL rated. Use in category 3, 5, 5E compliant data networks.
RoHS compliant
EZ to verify wire sequence.
Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.041mm (0.041")
Contains 50 EZ Cat6 Modular Plugs EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs. • Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance. EZ to verify wire sequence For use in Cat 6 compliant data networks. • Category 6 performance per EIA/TIA B.2.
Platinum Tools 18312F RG11 Compression, Nickel Pl. 4/Clamshell.
The Platinum Tools 18312 F RG11, Nickel Plated SealSmart Coaxial Compression Connectors provide simple, fast and reliable terminations. It is the perfect solution for CATV, DSS, Security, Home Theater and Residential Structured wiring installations.
Platinum Tools 18312F RG11 Compression, Nickel Pl. 4/Clamshell.
The patented EZ-RJ45® Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves performance! Reduces scrap, no wasted crimps. More reliable, higher performance. Crimp with the patented EZ-RJ45 Crimp Tool...crimps and trims in one cycle. Manufactured in the USA. Patented.
Thru holes allow wire pairs to be inserted thru front of connector for faster terminations.
Works with solid or stranded wire.
Simple one piece design...no bars or liners.
FCC compliant, UL rated. Use in category 3, 5, 5E compliant data networks.
RoHS compliant
EZ to verify wire sequence.
Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.041mm (0.041")
Platinum Tools 202044J ezEX44 connectors, 100/Jar.Compliant with Cat5E, Cat6, and Cat6a cables
This RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).
Hi-Lo stagger to isolate each conductor
Simple one piece/pass through design, no bars or liners