Audio

The PSB-200 subwoofer amplifier delivers clean, solid power required to drive small-to-medium sized in-wall or floor stand style subwoofer speakers. Provide 200W RMS @ 4 Ohms (140W RMS @ 8 Ohms) of deep, hard-hitting high fidelity bass amplification and is tailored for home audio and home theater audio systems. Allows compensation for subwoofer location relative to the main speakers, can be adjusted from 0° to 180°. The Low Pass Filter from 35Hz to 160Hz. Unique solid and beautiful modern compact chassis exterior design for easy place on your music media stand/cabinet, fits anywhere you need it. The cool running light weight Class D amps are quiet and can run all night without over-heat issue. This subwoofer amp is an ideal match to our passive in-wall subwoofers. The PSB-200 is stable down to 4 ohms, so it will easily drive one or two subs. Use the front panel crossover and phase controls to dial in the sound just the way you want it. 

Features:

- 8 channel amplifier with 4 independent playback zones

- Play the same source through all 4 zones, or play a different source in each zone

- 50W per Channel, bridged 160W per Zone @ 8 Ohms

- Zones are bridgeable to create flexible power configurations

- Independent channel gain controls allow the output of each speaker to be perfectly matched

- Two common or BUS inputs that receives audio signals from standard line-level audio sources and sends them to any or all channels

- S/PDIF Optical Bus Input for digital sources

- High efficiency, cool running digital amplification

- Global Trigger -Input/output triggers on/off for all zones on the bus input

- Zone Trigger -Independent trigger input/output on each zone for on/off

- Can be converted easily between rack-mount and tabletop configurations

- Heavy-duty steel chassis with black glass and brushed aluminum faceplate

Spec:

- Power Output: 80W /Channel, 1kHz into 4 Ohms

50W /Channel, 1kHz into 8 Ohms

- Bridged Power Output: 160W /Zone, 1kHz into 8 Ohms

- Signal-to-Noise Ratio:90dB

- Frequency Response: 20Hz to 20kHz +1.7/-1dB at 1W output into 8 Ohms

- Minimum Impedance: Stereo Mode 4 Ohms, Bridge Mode 8 Ohms

- Input Impedance: 22k Ohms Line Input

- Trigger Inputs/output: Bus In /Out. Each Zone In/Out 12VDC 100mA

- Zone Line Input: Line, S/PDIF or Bus select switch per zone

- Bridge Mode: Select Stereo or Bridge mode per zone 8 Ohm only

- Speaker Connectors: Detachable speaker terminals support up to 14 awg wire

- Fuse Rating: 100-120V/T5A, 250V US , 220-230V/T2.5A, 250V Europe