Key Digital

·  Two Independent Matrix Switchers: L/R Analog Stereo & Digital PCM

·  Powered by Eight DSP’s: one for each output that can be assign to Audio Stereo or PCM. Each DSP can independently control: Volume, Balance, Bass, Middle, Treble, Lip-Sync, Mute.

·  Two Matrix Switchers and Eight DSP’s produce Four combinations below:

• a. Analog Stereo pass through DSP, PCM pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio.
• b. Analog Stereo has independent switching position but PCM inputs are disabled. The Output PCM is mirrored from Analog Stereo output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.
• c. PCM has independent switching position but Analog Stereo inputs are disabled. The Output Analog Stereo is mirrored from PCM output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.
• d. PCM pass through DSP, Analog Stereo pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio. Has virtually no crosstalk because of the digital nature of matrix switcher.

·  Four Output Modes via 1 DSP per Output:

• Bypass: L/R Analog in to L/R Analog out with audio control, PCM in to PCM out without audio control (bypass)
• Composite Video Bypass: L/R Analog in to L/R Analog out with audio control, Composite Video in to Composite Video out
• Analog to Digital: L/R Analog in to L/R Analog out with audio control, L/R Analog in to PCM out with audio control
• Digital to Analog: PCM in to L/R Analog out with audio control, PCM in to PCM out without audio control

·  Audio Control: Volume, balance, bass, mid, treble, lip-sync, muting for 2ch audio

·  Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

·  RG6 Cable Runs: Up to 300 ft. without signal degradation

·  Control: Front panel buttons and LEDs, Serial IR, Optical IR, RS-232 control ››Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, etc.

·  Matrix Expansion: Custom configuration SKUs available

• Can be incrementally expanded (with additional units) up to 8 Sources/Inputs to 64 Zones/Outputs or 16 Sources/Inputs to 64 Zones/Outputs.
• 16x16 (shown) capable of up to 16x64

Two Independent Matrix Switchers: L/R Analog Stereo & Digital PCM / Composite Video

Powered by Eight DSP’s: one for each output that can be assign to Audio Stereo or PCM. Each DSP can independently control: Volume, Balance, Bass, Middle, Treble, Lip-Sync, Mute.

Two Matrix Switchers and Eight DSP’s produce Four combinations below:

a. Analog Stereo pass through DSP, PCM pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio.

b. Analog Stereo has independent switching position but PCM inputs are disabled. The Output PCM is mirrored from Analog Stereo output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

c. PCM has independent switching position but Analog Stereo inputs are disabled. The Output Analog Stereo is mirrored from PCM output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

d. PCM pass through DSP, Analog Stereo pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio. Has virtually no crosstalk because of the digital nature of matrix switcher.

Four Output Modes via 1 DSP per Output:

Bypass: L/R Analog in to L/R Analog out with audio control, PCM in to PCM out without audio control (bypass)

Composite Video Bypass: L/R Analog in to L/R Analog out with audio control, Composite Video in to Composite Video out

Analog to Digital: L/R Analog in to L/R Analog out with audio control, L/R Analog in to PCM out with audio control

Digital to Analog: PCM in to L/R Analog out with audio control, PCM in to PCM out without audio control

Audio Control: Volume, balance, bass, mid, treble, lip-sync, muting for 2ch audio

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

RG6 Cable Runs: Up to 300 ft. without signal degradation

Control: Front panel buttons and LEDs, Serial IR, Optical IR, RS-232 control

Two Independent Matrix Switchers: L/R Analog Stereo & Digital PCM / Composite Video

Powered by Eight DSP’s: one for each output that can be assign to Audio Stereo or PCM. Each DSP can independently control: Volume, Balance, Bass, Middle, Treble, Lip-Sync, Mute.

Two Matrix Switchers and Eight DSP’s produce Four combinations below:

a. Analog Stereo pass through DSP, PCM pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio.

b. Analog Stereo has independent switching position but PCM inputs are disabled. The Output PCM is mirrored from Analog Stereo output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

c. PCM has independent switching position but Analog Stereo inputs are disabled. The Output Analog Stereo is mirrored from PCM output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

d. PCM pass through DSP, Analog Stereo pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio. Has virtually no crosstalk because of the digital nature of matrix switcher.

Four Output Modes via 1 DSP per Output:

Bypass: L/R Analog in to L/R Analog out with audio control, PCM in to PCM out without audio control (bypass)

Composite Video Bypass: L/R Analog in to L/R Analog out with audio control, Composite Video in to Composite Video out

Analog to Digital: L/R Analog in to L/R Analog out with audio control, L/R Analog in to PCM out with audio control

Digital to Analog: PCM in to L/R Analog out with audio control, PCM in to PCM out without audio control

Audio Control: Volume, balance, bass, mid, treble, lip-sync, muting for 2ch audio

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

RG6 Cable Runs: Up to 300 ft. without signal degradation

Control: Front panel buttons and LEDs, Serial IR, Optical IR, RS-232 control

Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, etc.

Two Independent Matrix Switchers: L/R Analog Stereo & Digital PCM / Composite Video

Powered by Eight DSP’s: one for each output that can be assign to Audio Stereo or PCM. Each DSP can independently control: Volume, Balance, Bass, Middle, Treble, Lip-Sync, Mute.

Two Matrix Switchers and Eight DSP’s produce Four combinations below:

a. Analog Stereo pass through DSP, PCM pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio.

b. Analog Stereo has independent switching position but PCM inputs are disabled. The Output PCM is mirrored from Analog Stereo output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

c. PCM has independent switching position but Analog Stereo inputs are disabled. The Output Analog Stereo is mirrored from PCM output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

d. PCM pass through DSP, Analog Stereo pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio. Has virtually no crosstalk because of the digital nature of matrix switcher.

Four Output Modes via 1 DSP per Output:

Bypass: L/R Analog in to L/R Analog out with audio control, PCM in to PCM out without audio control (bypass)

Composite Video Bypass: L/R Analog in to L/R Analog out with audio control, Composite Video in to Composite Video out

Analog to Digital: L/R Analog in to L/R Analog out with audio control, L/R Analog in to PCM out with audio control

Digital to Analog: PCM in to L/R Analog out with audio control, PCM in to PCM out without audio control

Audio Control: Volume, balance, bass, mid, treble, lip-sync, muting for 2ch audio

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

RG6 Cable Runs: Up to 300 ft. without signal degradation

Control: Front panel buttons and LEDs, Serial IR, Optical IR, RS-232 control

Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, etc.

Two Independent Matrix Switchers: L/R Analog Stereo & Digital PCM / Composite Video

Powered by Eight DSP’s: one for each output that can be assign to Audio Stereo or PCM. Each DSP can independently control: Volume, Balance, Bass, Middle, Treble, Lip-Sync, Mute.

Two Matrix Switchers and Eight DSP’s produce Four combinations below:

a. Analog Stereo pass through DSP, PCM pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio.

b. Analog Stereo has independent switching position but PCM inputs are disabled. The Output PCM is mirrored from Analog Stereo output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

c. PCM has independent switching position but Analog Stereo inputs are disabled. The Output Analog Stereo is mirrored from PCM output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

d. PCM pass through DSP, Analog Stereo pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio. Has virtually no crosstalk because of the digital nature of matrix switcher.

Four Output Modes via 1 DSP per Output:

Bypass: L/R Analog in to L/R Analog out with audio control, PCM in to PCM out without audio control (bypass)

Composite Video Bypass: L/R Analog in to L/R Analog out with audio control, Composite Video in to Composite Video out

Analog to Digital: L/R Analog in to L/R Analog out with audio control, L/R Analog in to PCM out with audio control

Digital to Analog: PCM in to L/R Analog out with audio control, PCM in to PCM out without audio control

Audio Control: Volume, balance, bass, mid, treble, lip-sync, muting for 2ch audio

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

RG6 Cable Runs: Up to 300 ft. without signal degradation

Control: Front panel buttons and LEDs, Serial IR, Optical IR, RS-232 control

Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, etc.

Two Independent Matrix Switchers: L/R Analog Stereo & Digital PCM / Composite Video

Powered by Eight DSP’s: one for each output that can be assign to Audio Stereo or PCM. Each DSP can independently control: Volume, Balance, Bass, Middle, Treble, Lip-Sync, Mute.

Two Matrix Switchers and Eight DSP’s produce Four combinations below:

a. Analog Stereo pass through DSP, PCM pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio.

b. Analog Stereo has independent switching position but PCM inputs are disabled. The Output PCM is mirrored from Analog Stereo output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

c. PCM has independent switching position but Analog Stereo inputs are disabled. The Output Analog Stereo is mirrored from PCM output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

d. PCM pass through DSP, Analog Stereo pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio. Has virtually no crosstalk because of the digital nature of matrix switcher.

Four Output Modes via 1 DSP per Output:

Bypass: L/R Analog in to L/R Analog out with audio control, PCM in to PCM out without audio control (bypass)

Composite Video Bypass: L/R Analog in to L/R Analog out with audio control, Composite Video in to Composite Video out

Analog to Digital: L/R Analog in to L/R Analog out with audio control, L/R Analog in to PCM out with audio control

Digital to Analog: PCM in to L/R Analog out with audio control, PCM in to PCM out without audio control

Audio Control: Volume, balance, bass, mid, treble, lip-sync, muting for 2ch audio

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

RG6 Cable Runs: Up to 300 ft. without signal degradation

Control: Front panel buttons and LEDs, Serial IR, Optical IR, RS-232 control

Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, etc.

Two Independent Matrix Switchers: L/R Analog Stereo & Digital PCM / Composite Video

Powered by Eight DSP’s: one for each output that can be assign to Audio Stereo or PCM. Each DSP can independently control: Volume, Balance, Bass, Middle, Treble, Lip-Sync, Mute.

Two Matrix Switchers and Eight DSP’s produce Four combinations below:

a. Analog Stereo pass through DSP, PCM pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio.

b. Analog Stereo has independent switching position but PCM inputs are disabled. The Output PCM is mirrored from Analog Stereo output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

c. PCM has independent switching position but Analog Stereo inputs are disabled. The Output Analog Stereo is mirrored from PCM output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

d. PCM pass through DSP, Analog Stereo pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio. Has virtually no crosstalk because of the digital nature of matrix switcher.

Four Output Modes via 1 DSP per Output:

Bypass: L/R Analog in to L/R Analog out with audio control, PCM in to PCM out without audio control (bypass)

Composite Video Bypass: L/R Analog in to L/R Analog out with audio control, Composite Video in to Composite Video out

Analog to Digital: L/R Analog in to L/R Analog out with audio control, L/R Analog in to PCM out with audio control

Digital to Analog: PCM in to L/R Analog out with audio control, PCM in to PCM out without audio control

Audio Control: Volume, balance, bass, mid, treble, lip-sync, muting for 2ch audio

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

RG6 Cable Runs: Up to 300 ft. without signal degradation

Control: Front panel buttons and LEDs, Serial IR, Optical IR, RS-232 control

Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, etc.

Two Independent Matrix Switchers: L/R Analog Stereo & Digital PCM / Composite Video

·  Powered by Eight DSP’s: one for each output that can be assign to Audio Stereo or PCM. Each DSP can independently control: Volume, Balance, Bass, Middle, Treble, Lip-Sync, Mute.

·  Two Matrix Switchers and Eight DSP’s produce Four combinations below:

• a. Analog Stereo pass through DSP, PCM pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio.
• b. Analog Stereo has independent switching position but PCM inputs are disabled. The Output PCM is mirrored from Analog Stereo output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.
• c. PCM has independent switching position but Analog Stereo inputs are disabled. The Output Analog Stereo is mirrored from PCM output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.
• d. PCM pass through DSP, Analog Stereo pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio. Has virtually no crosstalk because of the digital nature of matrix switcher.

·  Four Output Modes via 1 DSP per Output:

• Bypass: L/R Analog in to L/R Analog out with audio control, PCM in to PCM out without audio control (bypass)
• Composite Video Bypass: L/R Analog in to L/R Analog out with audio control, Composite Video in to Composite Video out
• Analog to Digital: L/R Analog in to L/R Analog out with audio control, L/R Analog in to PCM out with audio control
• Digital to Analog: PCM in to L/R Analog out with audio control, PCM in to PCM out without audio control

·  Audio Control: Volume, balance, bass, mid, treble, lip-sync, muting for 2ch audio

·  Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

·  RG6 Cable Runs: Up to 300 ft. without signal degradation

·  Control: Front panel buttons and LEDs, Serial IR, Optical IR, RS-232 control

·  Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, etc.

Two Independent Matrix Switchers: L/R Analog Stereo & Digital PCM / Composite Video

Powered by Eight DSP’s: one for each output that can be assign to Audio Stereo or PCM. Each DSP can independently control: Volume, Balance, Bass, Middle, Treble, Lip-Sync, Mute.

Two Matrix Switchers and Eight DSP’s produce Four combinations below:

a. Analog Stereo pass through DSP, PCM pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio.

b. Analog Stereo has independent switching position but PCM inputs are disabled. The Output PCM is mirrored from Analog Stereo output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

c. PCM has independent switching position but Analog Stereo inputs are disabled. The Output Analog Stereo is mirrored from PCM output. All DSP controls work on Analog Stereo and PCM output simultaneously. Both Analog Stereo and PCM have the same Audio.

d. PCM pass through DSP, Analog Stereo pass direct without DSP. Analog Stereo and PCM can have independent switching positions and different audio. Has virtually no crosstalk because of the digital nature of matrix switcher.

Four Output Modes via 1 DSP per Output:

Bypass: L/R Analog in to L/R Analog out with audio control, PCM in to PCM out without audio control (bypass)

Composite Video Bypass: L/R Analog in to L/R Analog out with audio control, Composite Video in to Composite Video out

Analog to Digital: L/R Analog in to L/R Analog out with audio control, L/R Analog in to PCM out with audio control

Digital to Analog: PCM in to L/R Analog out with audio control, PCM in to PCM out without audio control

Audio Control: Volume, balance, bass, mid, treble, lip-sync, muting for 2ch audio

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

RG6 Cable Runs: Up to 300 ft. without signal degradation

Control: Front panel buttons and LEDs, Serial IR, Optical IR, RS-232 control

Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, etc.

Digital Distribution: 1 HDMI source to 2 HDMI outputs

Resolution Support: SD, HD, and VESA up to 1080p (60Hz & 50Hz)

3D Ready: Capability to pass 3D stereoscopic signal formats

Audio De-Embedder: Can de-embed audio from the HDMI input and send it to external digital or analog audio outputs

EDID: Internal library with 12 default EDID configurations for each input, in addition to native EDID data for any Output/Display

Cascading Units: Up to 64 outputs or displays

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

Deep Color Support: Up to 12 bits/color

I2C Communication: EDID and HDCP transparency from Display to Source

Licensing: Fully licensed and compatible with all HDMI and HDCP technologies

Control: Front status LEDs and RS-232 control

Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Honeywell®, HAI®, Leviton®, etc.

Digital Switching: 4 HDMI Inputs to 1 HDMI Output

Resolution Support: SD, HD, and VESA up to UHD/4K (4096x2160/60/30/24 or 3840x2160/60/30/24)

Ultra HD/4K: Supports Ultra HD/4K Signal transmission

3D Ready: Capability to pass 3D stereoscopic signal formats

Full Buffer™ System: Manages TMDS re-clocking / signal re-generation, HDCP source & display authentication, Hot Plug Management and EDID Control handshake

Audio De-Embedder: Supports de-embedded audio from the HDMI input and send it to external digital or analog audio outputs

Analog Audio: Via 3.5mm stereo port, supports 2 ch. Analog audio

Digital Audio via Coax/RCA: Uses SPDIF format and supports 2 ch. PCM, Dolby DTS

Digital Audio via Optical: Uses SPDIF format and supports 2 ch. PCM, Dolby DTS

EDID Control: Internal library with 16 default EDID configurations, including native EDID data for any Output/Display

Intelligent Auto Sense (iAS™): Automatic signal sensing and switching to an active input

Addressable Units: Support up to 20 units per system

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

Deep Color Support: Up to 12 bits/color (up to 8 bits/color@4k/60)

I2C Communication: EDID and HDCP transparency from Display to Source

Licensing: Fully licensed and compatible with all HDMI and HDCP technologies

Control: Pushbutton, IR Sensor, Serial IR, and RS-232 control

Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Honeywell®, HAI®, Leviton®, etc.

·  Digital Switching: 2 HDMI Inputs to 1 HDMI Output

·  Resolution Support: SD, HD, and VESA up to UHD/4K (4096x2160/60/30/24 or 3840x2160/60/30/24)

·  Ultra HD/4K: Supports Ultra HD/4K Signal transmission

·  3D Ready: Capability to pass 3D stereoscopic signal formats

·  Full Buffer™ System: Manages TMDS re-clocking / signal re-generation, HDCP source & display authentication, Hot Plug Management and EDID Control handshake

·  Audio De-Embedder: Supports de-embedded audio from the HDMI input and send it to external digital or analog audio outputs

• Analog Audio: Via 3.5mm stereo port, supports 2 ch. Analog audio
• Digital Audio via Coax/RCA: Uses SPDIF format and supports 2 ch. PCM, Dolby DTS
• Digital Audio via Optical: Uses SPDIF format and supports 2 ch. PCM, Dolby DTS

·  EDID Control: Internal library with 16 default EDID configurations, including native EDID data for any Output/Display

·  Intelligent Auto Sense (iAS™): Automatic signal sensing and switching to an active input

·  Addressable Units: Support up to 20 units per system

·  Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

·  Deep Color Support: Up to 12 bits/color (up to 8 bits/color@4k/60)

·  I2C Communication: EDID and HDCP transparency from Display to Source

·  Licensing: Fully licensed and compatible with all HDMI and HDCP technologies

·  Control: Pushbutton, IR Sensor, Serial IR, and RS-232 control

·  Major Control System Support: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Honeywell®, HAI®, Leviton®, etc

Extension: Ultra HD/4K (4096x2160/60/30/24 or 3840x2160/60/30/24), 3D, 1080p/60, 1080p/24, 1080i, 720p, 480p/i HDMI signals up to 75 ft.

 Resolution Support: SD, HD, and VESA up to UHD/4K (4096x2160/60/30/24 or 3840x2160/60/30/24)

Ultra HD/4K: Supports Ultra HD/4K Signal transmission

3D Ready: Capability to pass 3D stereoscopic signal formats Ethernet Channel: 100 Mb/s Ethernet between two connected HDMI devices Audio De-Embedder: Supports de-embedded audio from the HDMI input and send it to external digital or analog audio outputs EDID Control: Internal library with 16 default EDID configurations, including native EDID data for any Output/Display Full Buffer™ System: Manages TMDS re-clocking / signal re-generation, HDCP source & display authentication, Hot Plug Management and EDID Control handshake Forced HPD: Capable of forcing HPD (Hot Plug Detection) to ensure a source always puts out a signal Auto Adjustment: Feedback, equalization and amplification depending on the length of cabling used Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™ Deep Color Support: Up to 12 bits/color (up to 8 bits/color@4k/60) I2C Communication: EDID and HDCP transparency from Display to Source Licensing: Fully licensed and compatible with all HDMI and HDCP technologies -

Converts 2-Channel PCM Digital Audio or Toslink Digital Audio to Analog L/R Audio

Supports 32, 44.1, 48, and 96 KHz sampling rates

Auto Selection of Input source with priority given to Optical Audio

I2C Communication: EDID and HDCP transparency from Display to Source

Format Conversion: Enables full integration with Audio Amplifiers, Distributed Audio Systems, and AV Receivers

Ideal for: Source devices with limited output formats, such as AppleTV

Space-efficient design: Enables easy installation and concealing

Extends: HDBaseT®/HDMI via Single CAT5e/6 cable, Ethernet

Control Signal Extension: Bi-directional IR and RS-232 control via 3.5mm mono connections on Tx and Rx units; includes one KD-IRE3501F IR Emitter to control IR controllable devices

HDMI Pass-through Port: Connects additional devices up to 20 ft. on Tx unit

HDBaseT: Utilized on CAT5e/6 RJ45 outputs

Signal Extension:

Up to 400 feet @ 1080p/60, 1080p/24, 1080i, 720p using Key Digital KD-CAT6STP1X CAT6/STP cabling

Up to 300 feet @ 1080p/60, 1080p/24, 1080i, 720p using third-party CAT5e/UTP cabling

3D Ready: Capability to pass 3D stereoscopic signal formats

Ethernet Channel: Allows 100 Mb/s Ethernet between two HDMI devices

Full Buffer™ System: Manages TMDS re-clocking / signal re-generation, HDCP source & display authentication, and EDID Control handshake

EDID Control: Internal library with 16 default EDID configurations for each input, in addition to native EDID data for any Output/Display

Auto Adjustment: Feedback, equalization and amplification depending on the length of cabling used

Daisy Chaining: Allows almost unlimited extension of HDBaseT/HDMI, RS-232 and IR signals with daisy chained Tx and Rx units

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

Deep Color Support: Up to 12 bits/color

CEC Support: To the main input and output HDMI channel

Does not support CEC for the pass-through HDMI output

I2C Communication: EDID and HDCP transparency from Display to Source

Licensing: Fully licensed and compatible with all HDMI and HDCP technologies

Cabling Requirements: Standard UTP CAT5, 5e or CAT6 cabling

For all installations, we highly recommend use of KD-CAT6STP1X STP cabling, especially in hostile electrical environments

The shield of CAT6STP must be soldered on both ends to the shield of RJ45 connector used. The CAT5/5e/6 cable has to be terminated according to TIA/EIA-568-B standard. The use of STP CAT5, 5e is not recommended.

Extends: HDBaseT®/HDMI via Single CAT5e/6 cable

Control Signal Extension: Bi-directional IR and RS-232 control via 3.5mm mono connections on Tx and Rx units; includes one KD-IRE3501F IR Emitter to control IR controllable devices

HDBaseT: Utilized on CAT5e/6 RJ45 outputs

Signal Extension:

Up to 250 feet @ 1080p/60, 1080p/24, 1080i, 720p using Key Digital KD-CAT6STP1X CAT6/STP cabling

Up to 200 feet @ 1080p/60, 1080p/24, 1080i, 720p using third-party CAT5e/UTP cabling

3D Ready: Capability to pass 3D stereoscopic signal formats

EDID Control: Internal library with 16 default EDID configurations for each input, in addition to native EDID data for any Output/Display

Full Buffer™ System: Manages TMDS re-clocking / signal re-generation, HDCP source & display authentication, and EDID Control handshake

Auto Adjustment: Feedback, equalization and amplification depending on the length of cabling used

Daisy Chaining: Allows almost unlimited extension of HDBaseT/HDMI, RS-232 and IR signals with daisy chained Tx and Rx units

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

Deep Color Support: Up to 12 bits/color

CEC Support: To the main input and output HDMI channel

I2C Communication: EDID and HDCP transparency from Display to Source

Licensing: Fully licensed and compatible with all HDMI and HDCP technologies

Cabling Requirements: Standard UTP CAT5, 5e or CAT6 cabling

For all installations, we highly recommend use of KD-CAT6STP1X STP cabling, especially in hostile electrical environments

The shield of CAT6STP must be soldered on both ends to the shield of RJ45 connector used. The CAT5/5e/6 cable has to be terminated according to TIA/EIA-568-B standard. The use of STP CAT5, 5e is not recommended.

Extends: HDBaseT/HDMI, IR/RS-232 via Single CAT5e/6 cable
Control Signal Extension: Uni-directional IR (Tx to Rx) OR bi-directional RS-232 control via 3.5mm stereo connection on Tx and Rx units; includes one KD-IRE3501F IR Emitter to control IR controllable devices
Power Extension: From Tx to Rx with Power Over HDBaseT Rx unit does not require power supply.

HDBaseT: Utilized on CAT5e/6 RJ45 output

Signal Extension:

Up to 250 feet @ 1080p/60, 1920x1200 via KD-CAT6STP1X CAT6/STP
Up to 210 feet @ 1080p/60, 1920x1200 via CAT5e/UTP cable
Up to 120 feet @ Ultra HD/4K (2160p/24) via KD-CAT6STP1X CAT6/STP
3D Ready: Capability to pass 3D stereoscopic signal formats
Ultra HD/4K: 2160p/24 video resolution support for 4K-capable televisions and commercial applications such as Digital Movie Theaters, CAD, Post Production

Auto Adjustment: Equalization depending on the length of cabling used
Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and
DTS-HD Master Audio™
Deep Color Support: 8-Bit at 2160p/24; 12-Bit at 480p/720p/1080i/1080p
CEC Support: To the main input and output HDMI channel
I2C Communication: EDID and HDCP transparency from Display to Source
Licensing: Fully licensed and compatible with all HDMI and HDCP technologies
Cabling Requirements: Standard UTP CAT5, 5e or CAT6 cabling
STP CAT6 cabling should be utilized in hostile electrical environments
The shield of CAT6STP must be soldered on both ends to the shield of RJ45 connector used. The CAT5/5e/6 cable has to be terminated according to TIA/EIA-568-B standard. The use of STP CAT5, 5e is not recommended

Extends: HDBaseT/HDMI via Single CAT5e/6 cable

Control Signal Extension: Uni-directional IR (Tx to Rx) OR bi-directional RS-232 control

via 3.5mm stereo connection on Tx and Rx units; includes one KD-IRE3501F IR Emitter to control IR controllable devices

HDBaseT: Utilized on CAT5e/6 RJ45 output

Signal Extension:

Up to 250 feet @ 1080p/60, 1920x1200 via KD-CAT6STP1X CAT6/STP

Up to 210 feet @ 1080p/60, 1920x1200 via CAT5e/UTP cable

Up to 120 feet @ Ultra HD/4K (2160p/24) via KD-CAT6STP1X CAT6/STP

3D Ready: Capability to pass 3D stereoscopic signal formats

Ultra HD/4K: 2160p/24 video resolution support for 4K-capable televisions and

commercial applications such as Digital Movie Theaters, CAD, Post Production

Auto Adjustment: Equalization depending on the length of cabling used

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and

DTS-HD Master Audio™

Deep Color Support: 8-Bit at 2160p/24; 12-Bit at 480p/720p/1080i/1080p

CEC Support: To the main input and output HDMI channel.

I2C Communication: EDID and HDCP transparency from Display to Source

Licensing: Fully licensed and compatible with all HDMI and HDCP technologies

Cabling Requirements: Standard UTP CAT5, 5e or CAT6 cabling

For all installations, we highly recommend use of KD-CAT6STP1X STP

cabling, especially in hostile electrical environments

The shield of CAT6STP must be soldered on both ends to the shield of RJ45

connector used. The CAT5/5e/6 cable has to be terminated according to TIA/

EIA-568-B standard. The use of STP CAT5, 5e is not recommended

Extends: HDMI via Dual CAT5e/6 cable with ARC, Ethernet

Control Signal Extension: Bi-directional IR signals OR uni-directional RS-232 control via 3.5mm mono connection on Tx and Rx units

Signal Extension:

Up to 250 feet @ 1080p/60, 1920x1200 via KD-CAT6STP1X CAT6/STP

Up to 150 feet @ 1080p/60, 1920x1200 via third party CAT5e/UTP cable

3D Ready: Capability to pass 3D stereoscopic signal formats

Ethernet Channel: 100 Mb/s Ethernet between two HDMI connecting devices

Audio Return Channel: Audio can be returned from display back to HDMI source for amplification and display

Auto Adjustment: Equalization depending on the length of cabling used

Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™

Deep Color Support: 12-Bit at 480p/720p/1080i, 8-Bit at 1080p/60

CEC Support: To the main input and output HDMI channel

I2C Communication: EDID and HDCP transparency from Display to Source

Licensing: Fully licensed and compatible with all HDMI and HDCP technologies

Cabling Requirements: Standard UTP CAT5, 5e or CAT6 cabling

For all installations, we highly recommend use of KD-CAT6STP1X STP cabling, especially in hostile electrical environments

The shield of CAT6STP must be soldered on both ends to the shield of RJ45 connector used. The CAT5/5e/6 cable has to be terminated according to TIA/EIA-568-B standard. The use of STP CAT5, 5e is not recommended