Four monitor modules are available for Fire-Lite Alarm’s MS-9050UD, MS-9200UDLS, and MS-9600 intelligent fire alarm control panels to suit a variety of applications. Monitor modules are used to supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors.
The 5104 is a six-zone fire alarm communicator providing digital fire reporting over ordinary telephone lines. The 5104 can be used to monitor existing local UL listed fire alarm control panels or as a standalone unit for sprinkler supervisory.
Ten-zone Style B (Class B) or Five-zone Style D (Class A) with optional module
Four NAC Circuits Style Y (Class B) or Four NAC Circuits Style Z (Class A) with optional modules
Built-in NAC synchronization for System Sensor, Wheelock, Gentex, Faraday and Amseco devices
Built in programmer: Integral 80 character LCD display with backlighting and keypad
Annunciator bus supports up to 8 devices, including ANN-80 LCD Remote Annunciator, ANN-S/PG remote serial or parallel printer gateway, ANN-RLY, 10 form C relay board, ANN-LED Zone annunciator and ANN-I/O LED driver board for graphic annunciators
Built-in two-line digital communicator for off premises monitoring
6-amp full load output, with 3 amps maximum/circuit, in NAC expander mode (UL 864).
4-amp continuous output in stand-alone mode (UL 1481).
Built-in Strobe Synchronization with System Sensor, Wheelock, or Gentex appliances for ADA Compliance.
Strobe signal "passes through" allowing syncing of large systems.
Instantaneous switchover to standby battery (if equipped) when AC fails, maintaining power to all attached devices without intervention.
LED lights for quick and easy diagnosis, troubleshooting, and status indication.
Two outputs can be used for constant power devices such as door holders (power drops upon alarm).
Contains two fully-isolated input/control circuits for added flexibility.
Fully regulated and filtered power output - optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated/filtered power.
Fully supervised power supply, battery, and NACs for added reliability.
FIRE-LITE DPDT Relay, 10A, w/ LED in metal backbox, red plastic cover, UL
e Air Products & Controls MR Series Multivoltage Control Relays offer SPDT or DPDT 10-amp contacts which may be operated by one of four input control voltages. A single relay may be energized from a voltage source of 24 VDC, 24 VAC, 115 VAC, or 230 VAC by wiring to appropriate input terminals.
Each relay contains a red light-emitting diode (LED) which indicates the relay coil is energized. Relays may be "snapped apart" from a standard four-module assembly and used independently. These devices are ideal for applications where local contacts are required for system status, remote contacts for control of electrical loads and general purpose switching. They are suitable for use with HVAC, Temperature Control, Fire Alarm, Security, Energy Management, and Lighting Control Systems.
The Air Products & Controls MR-199 Heavy Duty Power Relays are designed for control applications where 30-amp DPDT contacts are required. The 24 VDC and 120 VAC relays are mounted in a rugged steel enclosure.
Specifications:
MR-101 Position is rated at 0.015 amps (15 milliamps) @ 24 VAC, 24 VDC, 115 VAC, 230 VAC MR-201 Position is rated at 0.035 amps (35 milliamps) @ 24 VAC, 24 VDC, 115 VAC, 250 VAC Relays: All relays are UL recognized components Note: Only models with enclosures ("C" suffix) are UL listed assemblies (excludes MR-199X-13C and MR-199X-14C Enclosure: 18 guage CRS, plated with ½" conduit knockouts (top and bottom). The MR-101/CR and MR-201/C include a metal backbox with durable plastic cover Contact Rating: 10.0 A@ 115 VAC resistive Ambient Temperature: -50°C to +85°C (-50°F to +185°F) MR-101/T and MR-201/T are 3.0" (82 mm) H x 2.125" (54 mm) W x 1.5" (38.1 mm) D
Features
Each relay position may be energized from one of four input control voltages
Each relay position contains a red LED which illuminates when the coil is energized. This provides a timesaving convenience when checking an installed system, no metering is required
Single, dual, or triple relay modules may be "snapped apart" from a standard four-position master
SPDT or DPDT relays available
Available in dust-proof metal enclosures (with gray plastic cover on MR-101/CR and MR-201/CR) with LED viewing port
Red enclosure available on some models
Track mounting hardware to facilitate installation in standard cabinets
UL recognized relays rated at 10,000,000 mechanical operations
FIRE-LITE DPDT Relay, 10A, w/ LED in metal backbox, red plastic cover, UL ...
This unique and patented cover has helped stop false fire alarms around the world for over 30 years, without restricting legitimate alarms. Ideal for schools, hospitals, nursing homes, stores, hotels and public buildings of almost every kind.
STI-1150 consists of a clear, tamperproof, super tough polycarbonate cover, frame, gaskets and piezo horn that fits over most manual pull stations. When lifted to gain access to the actual alarm, a piercing 95 or 105 dB warning horn sounds. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).
This version of the Stopper II is UL Listed for outdoor use.
STI-1150 FEATURES
Cover is UV-stabilized.
Designed for outdoor use.
Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components).
95 or 105 dB self-contained alarm. Complete with battery.
STI-1150 is for flush mount pull stations (surface - see STI-1155).
The Stopper II design is a registered trade mark of Safety Technology International, Inc.
UL Listed to U.S. and Canadian safety standards
Typical working properties of polycarbonate are -40° to 250°F (-40° to 121°C).
Fits virtually all manual pull stations (see Technical Data Sheet for dimensions).
Note: End user must verify the alarm and battery function every six months and replace battery annually or as required.
The SK-2 and SK-2E (SK-2/E) are two zone conventional fire alarm control panels (FACPs) that bring the latest in microprocessor technology to conventional fire controls. The SK-2 is a 120 VAC FACP and the SK-2E is a 240 VAC FACP. These FACPs provide reliable fire signaling protection for small- to medium-sized commercial, industrial, and institutional buildings.
The IntelliKnight 5700 is a 50-100 point single loop addressable fire alarm control/communicator system. Powerful features such as drift compensation, maintenance alert, built-in digital communicator, and distributed intelligent power are delivered in this powerful FACP from Silent Knight.
6 Zone conventional fire panel, UDACT, 5 Amp, 24vdc
The MR-2306-DR and MR-2306-DDR are equipped with six Class "B" (Style "B") initiating circuits and two Class "B" (Style "Y") indicating circuits rated @ 1.7 Amps maximum. (Total of 5 Amps) The MR-2306-DDR is equipped with a built-in UDACT/Digital Communicator. One MR-2300-A Six Initiating Circuit Class "A" Converter Modules may be used for Class "A" (Style "D") wiring of the initiating circuits. One MR-2300-NC2 Two Indicating Circuit Class "A" Converter Module may be used for Class "A" (Style "Z") wiring of the indicating circuits. The cabinet will support up to 12 AH batteries. The panels can be semi-flush mounted with the optional MR-2300TRB trim ring. Note: Not ULC listed.
6 Zone conventional fire panel, UDACT, 5 Amp, 24vdc
The Potter Amseco MBA-6-12 is a vibrating bell designed for use as a fire, burglar, or general signaling device and features a low power consumption and high decibel rating.
The MBA-612 mounts on a standard 4" square electrical box for indoor use or on a model BBK-1 weatherproof backbox of BBX-1 deep weatherproof backbox for outdoor applications
Firelite SLC-2LS SLC Option module to increase points
318-point addressable fire alarm control panel with optional Digital Alarm Communicator/Transmitter (DACT-UD2) and expandable to 636 addressable points with an optional second Signaling Line Circuit (SLC-2LS). MS-9600UDLS is a 318-point addressable fire alarm control panel with Digital Alarm Communicator/Transmitter (DACT-UD2) and expandable to 636 addressable points with an optional second Signaling Line Circuit (SLC-2LS).
Up to 159 detectors and 159 control/monitor modules (total of 318 devices) per SLC (636 with SLC-2LS option card)
Uses PS-Tools programming utility
LiteSpeed protocol for SLC communication polls 10 devices at a time and operates on standard, unshielded wire
Auto programmable function reduces installation time
Advanced Fire Technology includes sensitivity testing and automatic drift compensation
7 amps of power distributed across 4 NAC circuits with onboard Sync Select for System Sensor®, Gentex® , or Wheelock® devices
Firelite SLC-2LS SLC Option module to increase points