Baluns & Extenders

Allows HDMI Audio/Video Signals to be Transmitted Using a single Coaxial Cable

• Transmission Range: Extends 1080p Resolution Up to 328 ft (100 m) over RG-6 Coaxial Cable (Dual and Quad-Shielded);Extends 1080p Resolution Up to 164 ft (50 m) ov

Application: Allows digital signals to be transmitted using a single Cat5e or Cat6 cable

• Transmission Range: Up to 330 ft (100 meters)
• Accepts Digital Coax or Optical Toslink
• Supports Digital 5.1 (DTS- Dolby Digital- etc.)

The power-over-ethernet units provide a true "one wire" solution. No need for a separate power supply. The second generation (2G) HD/IP™ Transmitter/Receivers with PoE use a patented process to send visually lossless 1080p video and audio across a gigabit Network with a result identical to a direct HDMI® cable connection.

Contractor Series HDMI Coax Extender. When you need to get the job done on a budget with product you know is going to work we've designed this product with Contractors in mind. Trasmits HDMI signal over a single COAX (BNC) up to 100 Meters

The Palun01 from EverFocus is a Palun TX connects between PoE switch and Coax cable; Palun RX connects between IP devices and Coax cable. Sold as pair.

• HDMI over single Cat 5E/6
• Carries 10.2 Gbps signals up to 100 Meters
• HDBaseT Technology
• Supports POE (Power over Ethernet. Power only needed on one side)
• Bidirectional IR support with 2 IR TX and 2 IR RX included

HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length

Power Over HDBaseT: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply

Signal Extension: Up to 150 ft. @ 4K/24/25/30/60 using KD-CAT6STP1X cabling Up to 125 ft. @ 4K/24/25/30/60 using third-party CAT5e/6 UTP/STP Up to 250 ft. @ 1080p/1920x1200 using KD-CAT6STP1X cabling Up to 200 ft. @ 1080p/1920x1200 using third-party CAT5e/6 UTP/STP 4K/Ultra HD:

Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4 or 60Hz at 4:2:0 EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input and output devices Full Buffer System™:

Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block Up/Down IR:

Two channels of IR enable control to/from devices connected to Tx and Rx units RS-232: Bi-Directional control to/from Tx and Rx unit on DB9 connector RS-232 Control Mode: Provides control of Tx unit as well as connectivity status 3D:

Support for standard 3D stereoscopic signal formats Deep Color Support: 12bit Deep Color video / 8bit color for 4K/60 Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™ Licensing:

Fully licensed and compatible with HDMI up to 4KUHD/60Fps and HDCP 1.0 to HDCP 1.4 technologies. For HDCP 2.2 sources use KD-HDFIX22 in conjunction with this product.

CEC Support: For inter-device control between main input and output HDMI channel Daisy Chaining: Connection of Tx and Rx units allows almost unlimited extension of HDMI, RS-232, IR and Ethernet signals HDMI® and HDCP Licensing:

Fully licensed and compatible with all HDMI and HDCP technologies I2C Communication: EDID and HDCP authentication to Display and Source Control System Support: Compatible with Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Honeywell®, HAI®, Leviton® etc. -

HDBaseT/HDMI via Single CAT5e/6 (Tx + Rx Set) Extenders, support Ultra HD/4K, EDID Control, Hot Plug Control, Full Buffer System, HDMI Pass-through, Ethernet, IR Sensor, Up/Down IR & RS-232 (KD-CAT6STP1X is Highly Recommended)

The Atlona AT-UHD-EX-70-2PS 4K/UHD HDMI over HDBaseT TX/RX Kit is comprised of an HDBaseT transmitter unit and a receiver unit. It supports HDMI transmission up to 230' over a Cat 6a/7 cable. The kit supports video signals up to DCI 4K @ 60p with embedded multi-channel audio. HDCP 2.2 compliance and EDID communication support ensure that 4K content is displayed properly. Both the transmitter and receiver fit in a quarter-rack space and feature metal enclosures for durability and easy rack mounting. Rear panel I/O ports provide uncluttered wire management.

This kit is ideal for use in residential and commercial point-to-point applications that can leverage HDBaseT for signal transmission over greater distances than conventional HDMI solutions can support. Furthermore, the kit is compatible with the H2H matrix switcher series or HDDA distribution amplifier series for long distance AV signal extension without PoE capability or control signal extension requirements.