Audio Accessories & Connectors

 Splits one input signal to three SPDIF/TosLink output signals • Supports LPCM2.0/DTS/Dolby-AC3 audio • Supports signal retiming • Uses fi ber optic cable • Over-voltage protection • Plug-and-play ready AS-1X3TSPLIT PRODUCT OVERVIEW This digital optical audio splitter allows the user to connect and distribute one digital optical output to three digital optical inputs without degradation. Ideal for connecting your TOSLINK audio source device to up to three device inputs, for use in home theaters, control rooms, production studios, A/V presentations, and meeting rooms. © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION htsupport@metrahometheater.com HOME SUPPORT 866-839-9187 HOME THEATER www.MetraHomeTheater.com 1-866-839-9187 | 386-257-1186 AS-1X3TSPLIT A feature packed digital optical audio splitter at a very competitive price point. DIGITAL OPTICAL AUDIO SPLITTER AS-1X3TSPLIT SPECIFICATIONS: Supported Digital Audio Formats………………………………………...LPCM 2.0/DTX/Dolby-AC3 Maximum Output Cable Distance……………………………………………………………40 Meters Power Supply Input…………………………………………………….AC, 50Hz/60Hz, 100V – 240V Power Supply Out………………………………………………………………………DC, 5V, 500 Ma Maximum Current Draw………………………………………………………………………….100 Ma Operating Temperature Range……………………………………………...0 to 40 (C), 32 to 104 (f) Dimension (L x W x H)…………………………….…………54 x 54 x 23.5 (mm), 2.2 x 2.2 x .9 (in) Weight……………………………………………………………………………..35 (grams), 1.24 (oz)

Scosche's LOC80 line output converter allows you to connect a receiver with no preamp outputs to an amplifier without speaker-level inputs. The LOC80 handles a speaker-level signal up to 80 watts RMS per channel, and converts it to a line-level signal you can plug into your amp's input.

The LOC80 reduces the incoming speaker-level signals so you can use a stereo RCA patch cable (not included) to make the connection to your amp. The converter features adjustable gain settings on each channel, and it's compatible with almost any car stereo. Warranty: 90 days.

The Iso•Max CI-2RR is a passive two channel audio ground isolator designed to eliminate hum and buzz caused by ground loops in the most demanding audio systems.

• Eliminates hum and buzz caused by ground loops
• Extended frequency response from 10 Hz to 40 kHz
• Less than 2° phase deviation at 20 Hz
• Plug and play easy to use – no power required

Send stereo 3.5mm audio signals a long distance using Category cable terminated with RJ45’s

• Extends up to 150’
• 3.5mm stereo to RJ45 connector
• 1 Pack

Ethereal CS-D@D Digital to Digital format converter - Coaxial or Digital Audio
Supports S/PDIF audio & extends transferring distance
1x coaxial jack & 1x optical jack inputs
1x coaxial jack & 1x optical jack outputs