CCTV Video Balun

Altronix HubWayAv2PK slim-line video balun/combiners (8-Pack) may be used with any HubWay or HubSat UTP transceiver hub. The HubWayAv2PK routes power, video, and data (PVD) from the Altronix HubWay or HubSat units for either fixed or PTZ cameras

https://www.altronix.com/products/eBridge1PCRT

Input

24VDC Class 2 power supply (polarity not observed) or 24VAC Class 2 plug-in transformer.

Power Consumption (under maximum load)

eBridge1PCR:

24VDC/1,000mA or 24VAC/900mA.

eBridge1PCT: Powered by eBridge1PCR.

Ethernet

Connectivity: RJ45, auto-crossover.

Wire type: 4-pair CAT5 or better structured cable.

Distance: up to 100m.

Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) delivered to camera by eBridge1PCT.

Power provided by eBridge1PCR to eBridge1PCT by PoE protocol.

Coax

Distance: up to 500m (see Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 3) for power delivery of coax.

Throughput is rated to pass 25Mbps of data at distances up to 500m. With proper headend equipment this supports Megapixel, HD720, HD1080.

Connectivity: BNC, RG-59/U or similar.

LED Indicators

eBridge1PCR:

Blue LED - Coax link connection.

Green LED - PoE ON.

Green LED - Power ON.

eBridge1PCR (RJ45): Yellow and Green LED IP Link status, 10/100Base-T/active.

eBridge1PCT:

Blue LED - Coax link connection.

Green LED - PoE from eBridge1PCR.

 Environmental

Operating Temperature:

 eBridge1PCR:

- 20° C to +45° C ( - 4° F to 113° F).

eBridge1PCT:

For 15W: - 40° C to 75° C ( - 40° F to 167° F).

Storage Temperature:

- 30° to 70° C (-22° to 158° F).

 Functions

Auto detection and protection of legacy non-PoE cameras/devices.