Cable Splitters & Amplifiers

• Takes One 75 Ohm Input and Splits It Into Three 75 Ohm Outputs
• Type Connectors
• High Quality Zinc Diecast Body Features
  Grounding Block and Mounting Tabs
• For Indoor and Outdoor Use
• 5-900 MHz
• Moun

• Takes One 75 Ohm Input and Splits It Into Three 75 Ohm Outputs
•  Type Connectors
• High Quality Zinc Diecast Body Features
  Grounding Block and Mounting Tabs
• For Indoor and Outdoor Use
• 5-900 MHz
• Moun

• Takes One 75 Ohm Input and Splits It Into Four 75 Ohm Outputs
•  Type Connectors
• High Quality Zinc Diecast Body Features
  Grounding Block and Mounting Tabs
• For Indoor and Outdoor Use
• 5-900 MHz
• Mount

• Takes One 75 Ohm Input and Splits It Into Four 75 Ohm Outputs
•  Type Connectors
• High Quality Zinc Diecast Body Features
  Grounding Block and Mounting Tabs
• For Indoor and Outdoor Use
• 5-900 MHz
• Mount

• Takes One 75 Ohm Input and Splits It Into Two 75 Ohm Outputs
• Type Connectors
• High Quality Zinc Diecast Body Features
  Grounding Block and Mounting Tabs
• For Indoor and Outdoor Use
• 5-900 MHz
• Mounti

• Takes One 75 Ohm Input and Splits It Into Two 75 Ohm Outputs
• Type Connectors
• High Quality Zinc Diecast Body Features
  Grounding Block and Mounting Tabs
• For Indoor and Outdoor Use
• 5-900 MHz
• Mounti

The Kramer 105VB is a high-performance distribution amplifier for composite video signals. It takes one input, provides correct buffering and isolation and distributes the signal to five identical outputs.

This MoCA splitter product line has been carefully designed to
optimize the balance between the traditional performance requirements in the
5-1000 MHz spectrum along with the additional requirements necessary for the
proper communication of the MoCA® signals in the 1125-1675 MHz spectrum.

 PRODUCT FEATURES

• UL Listed
• UL approved PCV 20 year non-fade label
• Die-cast zinc tin plated housing
• Tin plated copper soldered back
• 3-way stainless steel mounting and ground screws
• 360 degree gold plated beryllium copper insert pin
• High-density ferrites
• Layered circuit board technology
• Low isolation at the MoCA frequencies
• Low intermodulation distortion
• 6kV surge protection
• Meets or exceeds all applicable SCTE requirements

 Not all configurations shown - available in Vertical and Horizontal are 2-port, 3-port, 4-port

 Available in Vertical Only, 6-Port and 8-Port

This MoCA splitter product line has been carefully designed to
optimize the balance between the traditional performance requirements in the
5-1000 MHz spectrum along with the additional requirements necessary for the
proper communication of the MoCA® signals in the 1125-1675 MHz spectrum.

 PRODUCT FEATURES

• UL Listed
• UL approved PCV 20 year non-fade label
• Die-cast zinc tin plated housing
• Tin plated copper soldered back
• 3-way stainless steel mounting and ground screws
• 360 degree gold plated beryllium copper insert pin
• High-density ferrites
• Layered circuit board technology
• Low isolation at the MoCA frequencies
• Low intermodulation distortion
• 6kV surge protection
• Meets or exceeds all applicable SCTE requirements

 Not all configurations shown - available in Vertical and Horizontal are 2-port, 3-port, 4-port

 Available in Vertical Only, 6-Port and 8-Port

This MoCA splitter product line has been carefully designed to
optimize the balance between the traditional performance requirements in the
5-1000 MHz spectrum along with the additional requirements necessary for the
proper communication of the MoCA® signals in the 1125-1675 MHz spectrum.

 PRODUCT FEATURES

• UL Listed
• UL approved PCV 20 year non-fade label
• Die-cast zinc tin plated housing
• Tin plated copper soldered back
• 3-way stainless steel mounting and ground screws
• 360 degree gold plated beryllium copper insert pin
• High-density ferrites
• Layered circuit board technology
• Low isolation at the MoCA frequencies
• Low intermodulation distortion
• 6kV surge protection
• Meets or exceeds all applicable SCTE requirements

 Not all configurations shown - available in Vertical and Horizontal are 2-port, 3-port, 4-port

 Available in Vertical Only, 6-Port and 8-Port

This MoCA splitter product line has been carefully designed to
optimize the balance between the traditional performance requirements in the
5-1000 MHz spectrum along with the additional requirements necessary for the
proper communication of the MoCA® signals in the 1125-1675 MHz spectrum.

 PRODUCT FEATURES

• UL Listed
• UL approved PCV 20 year non-fade label
• Die-cast zinc tin plated housing
• Tin plated copper soldered back
• 3-way stainless steel mounting and ground screws
• 360 degree gold plated beryllium copper insert pin
• High-density ferrites
• Layered circuit board technology
• Low isolation at the MoCA frequencies
• Low intermodulation distortion
• 6kV surge protection
• Meets or exceeds all applicable SCTE requirements

 Not all configurations shown - available in Vertical and Horizontal are 2-port, 3-port, 4-port

 Available in Vertical Only, 6-Port and 8-Port

This MoCA splitter product line has been carefully designed to
optimize the balance between the traditional performance requirements in the
5-1000 MHz spectrum along with the additional requirements necessary for the
proper communication of the MoCA® signals in the 1125-1675 MHz spectrum.

 PRODUCT FEATURES

• UL Listed
• UL approved PCV 20 year non-fade label
• Die-cast zinc tin plated housing
• Tin plated copper soldered back
• 3-way stainless steel mounting and ground screws
• 360 degree gold plated beryllium copper insert pin
• High-density ferrites
• Layered circuit board technology
• Low isolation at the MoCA frequencies
• Low intermodulation distortion
• 6kV surge protection
• Meets or exceeds all applicable SCTE requirements

 Not all configurations shown - available in Vertical and Horizontal are 2-port, 3-port, 4-port

 Available in Vertical Only, 6-Port and 8-Port

- 20 dB- 450-2250 MHz
- For Amplification of Satellite/DSS Signal
- Suggested for Coax Cable Runs In Excess of 100 ft.
- 75 Ohm “F” Type Connectors
- Indoor Use Only