JUST ADD POWER VBS-HDMI-459A 2G+4+ TILING PROCESSOR
The new 2G+4+ device from Just Add Power, global experts in HDMI over IP, is a 1U rack-mountable video tiling processor that enables integrators to deliver four HDMI sources to a single screen in a variety of viewing modes over a Gigabit managed network. This new feature is called Image Play™ . This expansion of the More Play™ Solution brings a welcome addition to the already robust Just Add Power feature set, which includes Video Wall App, Image Push™, Image Pull™, and Image Pause™.
In keeping with Just Add Power’s evolutionary design ethos, the 2G+4+ four-input video tiling processor can be mixed and matched in the same network as earlier 2G/2G+/2G+AVPro devices, allowing it to be added retroactively to existing 2G and 2G+ installs with maximum ease for the installer and minimum down time for the site.
One 2G+4+ Tiling Transmitter allows you to watch up to four HDMI sources at the same time on a single display in a variety of viewing modes, including quad view, picture in a picture, and picture on a picture. You can also stack up to five 2G+4+ units and, as a result, actually view up to 16 images simultaneously on a single display. Additionally, an HDMI pass-through port on the 2G+4+ Tiling Transmitter allows for distribution to a local mirrored display.
The 2G+4+ Tiling Transmitter is built around a powerful SOC scaler that enables a wide range of new applications for Just Add Power users. This includes support for Alpha Blending, PIP, POP, Tiling, Flip, Rotate and Chromakey commands. Each 2G+4+ Tiling Transmitter has four 2G receivers built in with one 2G+AVPro HD/IP post-mix transmitter that puts the tiled image onto the network switch, making it available for every integrated screen in the building. The 1U 2G+4+ chassis has a modular design for easy maintenance and can be mounted in ten different ways.
Whether you are in a residence, or at a sports bar wanting to watch four games at once, a video production operation needing a flexible switching solution with fades and seamless switching, or you are operating a digital signage system and wish to boost revenue by blending content with other live video sources, the 2G+4+ can deliver a high quality HD video viewing experience.
Features:
- Full HD 1080p video transmission
- Stereo or Multi-channel audio supported
- Built-in video wall support
- 3D Support
- Integrated RS232 port for distributed remote control
- Image PUSH, PULL and FREEZE supported
- OSD messaging
- 4 x 2G HD over IP Receivers on board
-
1 x 2G+AVPro HD over IP Post-Mix Transmitter with Dolby Digital DSP on board
-
1U 19″ Rackmount Chassis
-
Universal switching power supply: 100V ~ 240V
-
Reversible Mounting Position (can be installed 10 ways)
-
HDMI Pass-through port on Transmitter for local display
-
Stereo Audio Extraction with volume control
-
Stereo Audio Extraction with Adjustable Lip Sync
-
Locking HDMI Cable port
-
Alpha Blending, PIP, POP, Tiling, Flip, Rotate, and Chromakey
-
Instant Seamless Switching Between Sources of same resolution
-
Full HD 1080p Video Transmission
-
Stereo or Multi-channel Audio supported
-
Built-in Video Wall Function (will support video walls from 2×2 to 16×16 in size)
-
Modular design for easy maintenance
-
Easy Free Firmware Upgrades
-
Major Control System Drivers Available
-
Control via IP, IR, or RS232. Third party control system drivers available for: Control4, Crestron, RTI, AMX, URC, Elan! G, and Netstreams.
-
Image Push: push one or multiple JPEGS onto the receivers. This image can then be shown during system downtime as opposed to a blank screen.
-
Image Pull: pull a JPEG from the transmitter or the receivers for live image feedback
-
Image Pause: freeze the video on one or more receivers whilst the other receivers continue to show the live video content.
-
Custom On Screen Messaging: set up a customized error message on any or all of the HD over IP devices on the network during downtime.
- Stackable (i.e. with 5 x 2G+4+ installed, you can watch 16 sources on a single displays)
the 2G+4+ will work seamlessly with any 2G, 2G+ or 2G+AVPro transmitter and receiver. If you wished to tile four source devices you would need: 1 x single 2G, 2G+ or 2G+AVPro transmitter per HDMI source. You then connect the individual transmitters to the ports marked RX1, RX2, RX3 and RX4 on the 2G+4+ tiler via a single Cat 5e/ 6 cable. Each source device can be viewed as normal (aka singluarly or non-tiled) as well as in tiled mode, because it is physically connected to both a single Just Add Power transmitter as well as the 2G+4+ tiler. You then connect the port labelled “TX” on the 2G+4+ tiler to your Layer 3 Gigabit Managed Switch via another Cat 5e / 6 cable. The four sources will then be able to be viewed singularly or in multiview / tiled mode on any screen with a second generation Just Add Power receiver.